Steelworks Equipment

Home > Stock > Hot Rolling Mills > MH191 Morgan Wire Rod Mill

MH191 Morgan Wire Rod Mill

stands-1-7-and-shear.jpg

Mfr: Morgan USA

Age: 1971 - 1974

Billet Supply: 100mm Square

Wire Rod Products: 5.5mm - 12mm diameter

Annual Capacity: Approx 200,000TPY

Coil Weight: 1200 lb (550 kg)

Mill Layout: Continuous

Reheating Furnace: Pusher Type with Billet Unscrambler, billet usher and billet extractor, with pinch Roll at the Exit of Furnace.

Stand 1 Roll Diameter: 355 mm 300 HP DC motor and SCR Drives, rpm: 300/600 Roll RPM: 19.4 Gear Ratio: 30.9 Morgoil Bearings

Stand 2 Roll Diameter: 355 mm 300 HP DC motor and SCR Drives, rpm: 300/600 Roll RPM: 25.4 Gear Ratio: 23.65 Roller Bearings

Stand 3 Roll Diameter: 355 mm 400 HP DC motor and SCR Drives, rpm: 500/1000 (motor missing) Roll RPM: 40 Gear Ratio: 25 Morgoil Bearings

Stands 4,5,6,7 Roll Diameter: 304 mm Common Drive for stands 4 to 7, 1750 HP DC motor, rpm: 400/720 Roll RPM: 128.5 Gear Ratio: 5.6 Roller Bearings for Stand 7. Remaining stands Morgoil Bearings

Crop Shear

Stands 8&9 Roll Diameter: 304 mm Common for Stand 8&9, 900 HP DC motor, rpm: 400/800 Roll RPM: 289.4 Gear Ratio: 2.77 Morgoil Bearings

Stands 10 Roll Diameter: 250 mm 500 HP DC motor, rpm: 650/1300 Roll RPM:336.6 Gear Ratio: 3.85 Roller Bearings

Stand 11 Roll Diameter: 250 mm 400 HP DC motor, rpm: 650/1300 Roll RPM:410.6 Gear Ratio: 3.12 Morgoil Bearings

Stand 12 Roll Diameter: 250 mm 500 HP DC motor, rpm: 250/500 Roll RPM:500 Gear Ratio: 1 Morgoil Bearings

Stand 13 Roll Diameter: 250 mm 400 HP DC motor, rpm: 300/700 Roll RPM:600 Gear Ratio: 1 Morgoil Bearings

Crop Shear (2) with pinch rolls

Morgan No-Twist Blokes (2)Stands 14 -23
Two Morgan No Twist 10 Position Rod Block each block with 2 - 1250HP DC motors and SCR Drives Speed: 55m/s

Water Bosh (2)

Two Laying Head: Morgan

Two Stelmor Cooling: Morgan with blowers and motors

Hook and Chain Conveyor for coils

Spares Chocks 76 Carbide Rolls 70 Roll Grinders 3 Rolls 16

Tags: Debar, Debar Mill, Hot Mill, Hot rolling mill, Morgan, Rebar, Rebar Mill, Rod Mill, wire mill, Wire Rod Mill, WRM

If you would like to know more about our MH191 Morgan Wire Rod Mill please phone us on +44 (0) 1977 617319 or use this contact form

E-mail addresses and phone numbers will not be passed on to any other organisation.