MH177 Morgardshammer Rod Rolling Mill
Make: Morgardshammar Year: 1961 Type: 6 stand cross country mill Capacity: 7000 tons/year - Alloy steels and exotic metals Billet size: Upto 140mm square. Min bar size: 12mm round or square
Bearing Type: Roller
Comprising:- There are five gas furnaces which are all rated at 850-1250 degrees Two furnaces FG55 & fg62 supply heated material to the medium section train Three furnaces FG63, Fg64 and FG54 supply heated material for the intermediate section train Fg55 manufactured by Gibbons Bros with loader and pusher to rear, hearth- 30 feet long rear push furnace x 96”, Door opening 96” x 24” Fg62 manufactured by Gibbons, hearth 144” x 78”, Door opening 722 x 27” Fg63 & FG64 manufactured by wellman, hearth 156” x 60”, door opening 60” x 24” FG54 manufactured by wellman, hearth 108” x 66”, door opening 60” x 24”
2 off 3 Hi Morgardshammar P473 rolling mill stands The stands have a tilting table and runover table Electrically powered rollers on the tilting floors transport the bars between stands while they are hot. 1 off 3 Hi Morgardshammar P481 stands and 3 of Morgardshammar 2 Hi P481 stand. The stands are connected with each other using spade couplings and spline couplings
Mill motors 0/360/900/ 900 hp 271/650/650 volts 0/300/750/ 1200 rpm Inching speed of motor 150rpm 1110 Amps
Radiac abrasive cut off saw for cutting the bar (42” blade)
Complete set of 6 change stands
Image Gallery - click an image to enlarge
E-mail addresses and phone numbers will not be passed on to any other organisation.