Steelworks Equipment

MH176 Morgardshammar 24” x 72” 3-HI JUMP MILL

TECHNICAL DETAILS.

Make: Morgardshammar

Type: 3 Hi Jump Mill

Model: P572B

Size: 24" x 72" (600mm x 1800mm), Roll Diameter: Max. 600mm, Min. 490mm

Bearing type: Roller

Year: 1985

Rolling Mill Description The 3-Hi Morgardshammar Model P572B Rolling Mill is a housingless design equipped with spherical roller bearings. The roll chocks are tied together by means of motor driven internal screws. The entire mill frame, with the stand, balanced on a bottom mounted pneumatic cylinder is raised and lowered vertically on lubricated ways.

Equipment: (1) Operating Stand and (2) Set Up Stands (1) Combination Gear Reducer and 3-Hi Pinion Stand, ratio 8:1 (2) Drive Motors: 900 KW Rade Koncar Wound Rotor Drive Motors 5000 Volts AC 123 Amps 3 Phase 50 Hertz Rotor Voltage 995 535 Amps P.F. 0.89 RPM 985 Drive Spindles Couplings Rolls and Chocks Complement of Spare Rolls, both new and uncut

Bearings: Roller

Spares consist of more than 23 spare rolls, plus spindles, chocks, new bearings, and couplers.

E. & O.E.

Tags: 3 Hi Rolling Mill, breakdown mill, Hot rolling mill, Jump Mill, morgardshammar, Rolling Mill