Steelworks Equipment
http://www.steelworksequipment.com/bm/currently-available-stock/cold-rolling-mills/mc060-demag-65-wide-1650mm4-high-3-stand-tandem-co.shtmlMC060 DEMAG 65" Wide (1650mm) 4 High, 3 Stand Tandem Cold Mill
MC060 DEMAG 65" Wide (1650mm)4 High, 3 Stand Tandem Cold Mill
MANUFACTURER: DEMAG
AGE:1968
QUANTITY: ONE OFF TYPE: 4 HIGH, 3 STAND TANDEM COLD MILL
GENERAL SPECIFICATION:
MATERIAL: LOW CARBON STEELS
STARTING COIL: 23.6" TO 59" WIDE (600 TO 1500 MM) 0.078" TO 0.098" THICK (2 TO 2.5 MM) 20" I.D. (510 MM) 71" O.D. (1800 MM) 6.5 TONS (15 MT) FINISH COIL: 23.6" TO 59" WIDE (600 TO 1500 MM) 0.0079" TO 0.0315" THICK (0.2 TO 0.8 MM) 71" O.D. (1800 MM) 20" I.D. (510 MM) 16.5 TONS (15 MT) WORK ROLLS: 15" DIA. X 65" FACE (380 X 1650 MM) ROLLER BEARINGS BACK UP ROLLS: 45.25" DIA. X 65" FACE (1150 X 1650 MM) OIL FILM BEARINGS
HOUSING: CLOSED TOP, CAST STEEL CONSTRUCTION
HOUSING POST: 30" X 21.75" (762 X 552 MM) 652. 5 SQ. IN.
LINE SPEED: 785 FPM (240 M/MIN.)
STAND MOTOR MOTOR RPM GEAR RATIO ROLL RPM
PAYOFF REEL 300 KW 100/350 2.97:1
#1 1140 KW 380/1200 4.75:1 63.16/252.63
#2 1140 KW 380/1200 3.2:1 93.75/375
#3 1140 KW 380/1200 2:1 150/600
TENSION REEL 950 KW 340/1200 2.756:1
65" WIDE (1650 MM) DEMAG 3 STAND 4 HIGH TANDEM MILL SCREW DOWN: ELECTROMECHANICAL, 37 KW ROLL FORCE: 2425 TONS (2200 MT) PREVIOUS USE: TANDEM COLD MILL FEATURES: ONE THREE COIL RECEIVING STATION WITH COIL CAR PAYOFF REEL ASEA ELECTRICS (50 HERTZ) GAUGE CONTROL SYSTEM UPGRADED IN 1998 X-RAY GAUGE WITH SPARE C-FRAME UNIT POWER TRANSFORMER (22 KV - 935 V, 7.5 MVA) SPARE ARMATURE FOR MAIN DRIVE TENSION REEL WITH BELT WRAPPER AND COIL CAR BACK-UP ROLL CHANGE SLED SPARE STAND WITHOUT MOTORS (AVAILABLE SEPARATELY)