Steelworks Equipment

http://www.steelworksequipment.com/bm/current-customer-requirements/index.shtml

Wanted

We currently require for established customers the following equipment :-

We are looking for a hot rolling mill for the production of girder (H beam), Angle and Channel etc. The product sizes we want to roll is given below : Girder (H beam) 100 x 50mm -1.2kg/ft,2 kg/ft 127 x 63 mm -1.5 kg/ft, 2kg/ft and 2.5 kg/ ft 150 x 75mm – 2kg/ft,3kg/ft, 3.5kg/ft

Angle 63 x63 mm,75 x75 mm and 100 x100 mm

Channel 100 x50 mm, 127x 63 mm and 75 x37 mm If you have a mill in sight of above product line please share with us

300 000 Tonnes per year Bar Mill required.

planning production mix for our new mill - 300K TPY : A). 70% - Round Bars : dia.25mm-30mm=10%; dia.32mm-40mm=20%; dia.42mm-60mm=25%; dia.65mm-80mm=25%; dia.85mm-110mm=20%. B). 20% - Square Bars : SQ.25mm-32mm=15%; SQ.38mm-45mm=20%; SQ.50mm=45%; SQ.60mm-75mm=20%.

4 Hi cold reversing mill for stainless steel 1500mm wide

C). 10% - Hexagonal Bars : HX.22mm-25mm=25%; HX.28mm-32mm=25%; HX.38mm-45mm=30%; HX.50mm-75mm=20%, We prefer to have a H/V configuration mill that can produce the above products. To combine 2nd hand mechanical with new electrical controls & panels

BAR ROLLING MILL
CAPACITY 150,000 TONS PER YEAR / 0.15 MILLION TONS / YEAR
INPUT BILLET SQ 110 , 125 ,150 mm
MATERIAL CARBON STEEL, L & M ALLOY STEEL , STAINLESS STEEL
AISI 1045, 220 Mo 7 , SUP-9 , AISI 8620 , AISI 316, AISI 410
AISI 1141, AISI 5135, 20 Mn Cr 5, AISI 5145 H………..

PRODUCT SIZES TONNAGE PER YEAR

ROUND BAR 20 ~ 80 mm 40,000 TONS
DEFORMED BARS 19,25,36, 40 mm 50,000 TONS
FLAT BARS 50 x 6 ~ 100X 20 mm 10,000 TONS
MATERIAL SPRING STEEL SUP-9, SUP-10

SECTION STEEL 50,000 TONS
ANGLE IRON 20,000 TON
C CHANNEL 10,000 TON
I BEAM 10,000 TON
H BEAM 10,000 TON

ROUGHING MILL REQUIRED:- BLOOM BILLET SIZE : ROUND: 350MM SQUARE: 265MM BLOOM BILLET LENGTH: MIN :1000MM, MAX: 2200MM PRODUCTION SIZE: MIN:70MM,MAX:200MM

100mm dia. 2 roll straightening machine (Reeler) for steel bars

Tags: